TestStartAlreadyRunning, TestStopAlreadyStopped, TestStartStopMultipleServices
and TestStartStopMultipleFiles now state their intent and observe container
state (running/exited, not recreated) instead of matching progress lines.
The shared fixtures/start-stop had no other user and is removed.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
State what the test locks (a missing env_file only breaks the commands that
need the service referencing it) as a sequence of steps, and observe the
containers (running, scaled, not created) rather than only exit codes.
Completion is covered in both plugin and standalone modes through CompleteCmd.
The fixtures/env_file directory had no other user and is removed.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Express the intent (events refuses a service outside the project) with the
Scenario DSL; the project now lives in testdata/TestEventsUnknownService.
The shared fixtures/simple-composefile is still used by another test.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Shell completion is reached through a different entry point in plugin mode
(docker __complete compose) and in standalone mode (docker-compose
__complete). Expose it as an action so that scenarios can cover completion
in both modes, as the legacy tests did by hand.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
A command that is a no-op (e.g. start on an already running service) must
stay silent on stdout. The legacy tests asserted it by hand; expose it as a
generic observable of the scenario vocabulary.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Align the credentials use_api_socket gives a service with what
`docker run --use-api-socket` does in the Docker CLI:
- the config file is created with mode 0600 instead of the 0444 default
of a config file, so that only the container's root reads it;
- a service which sets DOCKER_CONFIG itself gets the socket but no
credentials, as the comment of the function always said;
- nothing is injected, and DOCKER_CONFIG is not set, when the host has no
registry credentials, and they are not looked up when no service is to
get them.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
A container created beforehand and only started by `compose start`
(`create` then `start`, `up --no-start` then `start`, or a dependency named
to `start`) came up with DOCKER_CONFIG pointing at /run/secrets/docker and no
file there: use_api_socket is applied by rewriting the project, and the
config file it adds is injected when a container starts, from the project the
start works on. Create and run applied the rewriting, start did not.
start() now applies it too, on the copy it already makes of the project, so
the caller's is left alone, and a project already rewritten (a dependency
started by run) is not rewritten twice. The rewriting tolerates a project
without environment or configs maps, as the one `compose start` loads.
up -d, a foreground up, scale and run already provided the file.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Tests:
- the monitor goroutine runs before the Start phase: a fake container start
holds until the events subscription is opened, so a Start phase run before
it would show;
- an interruption met by the Create phase ends the up with it and sets up no
session: the phase runs on the caller's context.
Both were found by mutation to survive the existing tests.
Comments and scenarios:
- useAPISocket's guard says what a second pass really does: duplicate volume
and config entries that also change the service's config hash;
- the interactive up's doc says an early interruption starts nothing, the
readDaemonTime's that callers decide how to report an interruption, and a
test comment on the listener no longer announces what is already wired;
- the use_api_socket scenario links docker/compose#14386, as SCENARIO.md asks
of a regression test, and the hook-runner scenario drops an output assertion
its ExitCode already covers.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
A pre_start runner carries the project and service labels but not the one-off
label the monitor's event filter requires, so its exit never reaches the
session. Nothing locked that: a runner exiting successfully would otherwise
win over the service's own exit code under --exit-code-from, or abort the
application under --abort-on-container-exit.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Interactive up used to create() the project, then start() it: two
daemon snapshots, the second built from the project as the caller gave
it rather than the canonical one the Create phase ran on.
It now prepares one Create+Start plan, like detached up. The Create
phase runs under the "up" progress scope, then the attach/printer/
monitor session is set up exactly as before, and the Start phase is
dispatched last, outside that scope, on a context that survives
Ctrl+C, with the printer as the hook-log listener. A failed Create
phase reaches neither the session nor the Start phase, and a dry run
only ever runs the Create phase.
The monitor's starting point is the daemon's time, which is read right
before the Start phase: a daemon that answers with a time that can't be
used fails the up with an explicit error, with no container started. One
that can't be asked at all (a read-only socket proxy without the info
endpoint) doesn't: the monitor then follows live events, with a warning.
The session, the watcher and the teardown now use the plan's own
project, which carries what preparation resolved. That makes
use_api_socket work in a foreground up: its config file lives only in
that project. A scenario locks it.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
A foreground up does stream a pre_start hook's output into the session since
the hook's log stream is opened once it is started. The hook scenario had
stopped asserting it on the belief it never did; its fixture only wrote to a
file, so nothing could reach stdout. The pre_start now also prints a marker
the service never logs, asserted on stdout, and the scenario states a single
intent covering both hooks.
Also tighten the scenarios after review:
- assert a container's printed output on stdout rather than on the whole
output, and add the state or negative checks that were missing
(ContainerEnv after a recreation, web exited once its dependency was
healthy, no output of the replaced container);
- the dependency timeout scenario carries the "deadline exceeded" guard of
its detached counterpart, with a fixture aligned on it;
- drop the abort message and the useless wait from the immediate-exit
scenario: up only returns once the application is stopped;
- rename the dry-run scenario after the others, minimize its fixture and stop
coupling it to the dry-run end-of-output wording;
- explain the sleeps of the fixtures, and give the hook one a larger margin;
- build tag e2e only: nothing here is Unix-specific.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Wait for the long-running service's final state after an abort instead of
reading it the instant the command returns, document why the dependent is
expected in the created state on a dependency timeout, and narrow the
dry-run "no start" check to the service's own lines.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
The hook scenario matched "pre-start-hook-ran" in the output, but the
service's own line "app-read:pre-start-hook-ran" contains it, so the
assertion passed without any pre_start output reaching the session. A
foreground up streams post_start's output but not pre_start's today
(checked on main too). Lock what actually holds: pre_start's effect, read
by the service through a value distinct from anything it logs.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Most e2e coverage of the start phase runs detached; the foreground
`up`, whose create and start phases are driven by separate code paths,
had none for hooks, health-gated dependencies, a container that exits as
soon as it starts, restarts of exited containers, recreation, dependency
timeouts or dry-run. Add scenarios that fix these observables before the
machinery behind it changes.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Follow-up to the report of the services a failed start interrupts:
- When it is the wait itself that fails (the dependency is unhealthy, or
exited with an error), the held service reads which condition was not met
instead of an interruption by the internal name of the wait node.
- Only the start phase reports what it gives up: the create phase stays
silent as before.
- An inspection cut short by the cancellation ends the wait as interrupted,
and no longer marks the healthy dependency as failed. A caller canceled
(Ctrl-C) at that point ends the wait as it always did.
- Two nodes failing together each end their own row with their own error,
whichever one cancels the phase, instead of leaving one on "Starting" or
reading "interrupted" for a failure that was its own.
- A replica whose start is behind it reads that only its post_start hooks
were interrupted.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
When a node of a plan phase fails, the executor cancels the whole phase.
The nodes it interrupts, or had not dispatched yet, got no final event:
a service recreated by the command and held by a depends_on wait stayed on
"Recreated", as if it were up, and the row of the dependency it was
waiting for stayed on "Waiting". Nothing said the service was left created
and never started.
Such a node now ends on an Error event, "not started" when its group never
reported Working, which names the depends_on condition it was held by and
the resource whose failure interrupted the phase. A wait interrupted that
way is a failure of its own (the condition was not reached) and closes the
"Waiting" rows of its dependency with a Skipped event. A phase canceled by
its caller (Ctrl-C) is reported as before: silently.
docker/compose#14372
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Pass `umask` to the engine as HostConfig.Umask when creating a
container, so that the entrypoint, exec and healthcheck processes run
with the requested file mode creation mask. The attribute is part of the
container specification, so pre_start init containers, created the same
way, get the umask of their service unless they declare their own.
Engines older than API 1.56 (Docker Engine 29.8) silently ignore the
field, which would run the container with the runtime's default umask
without any notice: creating a container with a umask against such an
engine now fails with an explicit error, like interface_name or image
volumes do.
The umask is part of the service configuration hash, so changing it
recreates the container; the hash of every other configuration is
untouched.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
A pre_start hook's output never reached anyone. The follow log stream was
opened on the runner while it was still in "created" state, before
ContainerStart; the engine ends such a stream at once, empty. So a foreground
up never showed the hook's output, and the error of a failing hook carried no
tail, though both are built from that stream.
The stream is now opened once the hook is started. The runner is retained
after it exits (AutoRemove is off), so a fast-exiting hook cannot make the
stream hit a 404, which is what opening it first was meant to prevent. Once the
hook has exited, the stream gets a short, bounded delay to deliver what the
daemon buffered before it is cut, instead of being cut right away.
The unit tests that pinned the old call order now pin the new one, and a
scenario locks that a failing hook reports what it printed.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
The rebuild now reports "Failed to recreate and restart service(s) after
update" instead of "Application failed to start after update", which
TestRebuildOnDotEnvWithExternalNetwork still asserted was absent: the
string no longer existed anywhere, so the check could never fail and the
test no longer detected a failed rebuild.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
The wiring of --wait-timeout into the plan's dependency waits was only
covered by executor tests that set the timeout by hand, and by an e2e
without depends_on. The scenario has a dependency that never gets
healthy and checks that up -d --wait-timeout fails with the dependency
timeout message (without the raw deadline error) and leaves the
dependent service created but not started.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
The dependencies a one-off starts go through the regular create path
and its config-hash divergence check, with no way to opt out: any
resolution difference with the command that created them (environment,
model edit) recreates the dependency — destroying state a previous run
built up (issue #13769's database losing its users). up already offers
--no-recreate for exactly this; run now aligns: the flag maps to the
"never" recreate policy, propagated through the RunOptions.CreateOptions
fields that startDependencies previously dropped. Default behavior is
unchanged (empty policy = "diverged").
Closes#13769
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Reproduces docker/compose#14287: a hook inheriting the service's
env_file (or declaring its own) runs without those variables.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
TestBuildTLS slept a fixed second after the dind daemon logged that it
listens, hoping the client certificates were written; poll for them
instead. TestForwardKeepsStreamingAfterHalfClose had 150ms of margin
between each chunk and the 300ms idle grace, which a loaded CI runner can
eat; use 100ms chunks against a 1s grace.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
extension.md gains the Image distribution section: invocation contract
(--image/--digest/--created/--source/--policy), the get-image request
and its chunked image-stream answer (zero-chunk terminated, stdin
exclusivity and drain-before-next-answer contract), the two-branch
decision guidance (digest as identity, created as ordering fallback,
reproducible builds caveat), and the support-by-presence metadata
convention is now stated as the general rule. The example provider
implements pull end to end — request, stock chunked reader, hash
recorded at PROVIDER_PULL_MARKER — and the e2e scenario locks the
whole path: up builds the service image and streams it to the provider
under the local verdict, compose pull re-invokes it under the
freshness contract.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
compose-go's loader now silently renames both deprecated
x-initialSync and x-develop extensions to their official
initial_sync and develop attributes before compose ever sees them
as extensions, so the legacy lookups and deprecation warnings for
both can no longer be reached. That's why the e2e test asserting on
the x-initialSync warning broke under the bump.
Simplify both lookups to rely on the promoted fields directly, and
rewrite the e2e test to check the legacy attribute still triggers a
real initial sync instead of asserting on an unreachable message.
Signed-off-by: Guillaume Lours <glours@users.noreply.github.com>
A GitHub Copilot PR review (docker/compose#14221#pullrequestreview-5300897216)
found three real issues in the reconciliation-plan-based hook runners, all
confirmed by direct reproduction against a live daemon before being fixed:
- **Hook runners excluded from discovery, stale runners persist.**
collectObservedState's single getContainers call requires ConfigHashLabel
(getDefaultFilters), which hook runners deliberately never carry -- so they
never reached the classification loop that populates HookContainers, and
planPreStartHookRunners never saw a stale runner to purge. Reproduced: a
failed hook run followed by a second `up` failed with "container name ...
already in use" instead of recovering. Fixed by listing hook containers
separately, by project+hook label alone (new getHookContainers), and
merging them in before classification. Locked in by a new e2e scenario,
TestPreStartHookRetryAfterFailureSucceeds, that reproduces the exact
failure-then-retry sequence.
- **Prepared hook runners misclassified as service replicas.** start's
containers.filter(isService(name), isNotOneOff) has no reason to exclude a
hook runner: it carries the same project/service labels as a real replica
and no one-off label either. Added isNotHookContainer to the filter chain
in startService, so a hook runner is never counted as (or started as) a
surviving replica.
- **Per-replica hooks create runners before unsupported configuration is
rejected.** per_replica is not yet supported (#14259): runPreStart
validates every hook up front and rejects the whole service before
executing any of them, but planPreStartHookRunners had no equivalent
check, so create/up would plan (and leave behind) runners for a service
whose hooks could never run. Mirrored the same up-front, all-or-nothing
validation in planPreStartHookRunners.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
pre_start hook containers become first-class resources of the
reconciliation plan. The reconciler plans one OpCreateHookContainer per
declared hook — gated on the same predicate the start phase uses to run
the hooks: a replica to start and no running replica SURVIVING the plan
(a recreated replica is not running at start time, so its runners are
planned too). Runner creation depends on every replica node (the
executor resolves the VolumesFrom target against a final live view),
on the infrastructure, and on the purge of previously observed runners:
names are deterministic (<project>-<service>-pre_start-<i>) so repeated
plans converge on the same container instead of accumulating anonymous
ones, and a new HookIndexLabel ties each runner to its hook.
runPreStart becomes pure execution: it looks up the created-state
runner for each hook by label and never creates one. A declared hook
without a prepared runner is an actionable error naming the
reconciliation command (docker compose up <service>) — the accepted
consequence is that stop-then-start of a hooked service errors, since
runners are consumed on success (locked by e2e). Success removal,
failure retention and cancellation cleanup are unchanged.
Runners stay invisible to the start/ps container listings — they carry
no ConfigHashLabel, which getDefaultFilters requires — and down keeps
removing them by hook label.
Rebased onto main, which diverged substantially since this branch was
opened (the unrelated container-spec-layering refactor, #14093,
restructured compose-go's ServiceConfig/PreStartHook types this PR also
touches). Reconciling pre_start.go/pre_start_test.go against that
refactor surfaced a real bug: createPreStartContainer builds the hook's
config via the shared getCreateConfigs, which unconditionally stamps a
ConfigHashLabel — silently contradicting this same commit's own
"invisible to ps/start" guarantee above, since that label is exactly
what getDefaultFilters requires. Fixed by deleting the label after
getCreateConfigs returns, with a test asserting its absence (an
independent local review, via the GitHub Copilot CLI, and a
fresh-context review agent both converged on catching this during
rebase verification). Also restored two security/label tests that only
existed on one side of the rebase (SecuritySensitiveFieldsHonored,
HookLabelsMerged), ported to call createPreStartContainer directly.
Also addresses glours' three review comments on this PR: hook-container
create operations for a service no longer chain serially (each depends
on the same shared containerNodes+infraDeps+purges set, letting the
executor create them in parallel), the corresponding plan-string test
assertion, and a clearer missing-runner error message hinting this
isn't necessarily a planning bug.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
A service migrated from regular replicas to a provider left its old
containers standing: not converged (a provider service has no replicas
to converge), not orphaned (the service is still in the model). The
first up after the migration then failed creating the relay, because
the leftover replica still held the service's canonical container name
the relay takes over. And even without the name conflict (replicas
2..n of a scaled service), stale replicas kept the service's network
alias, competing with the relay on DNS and serving outdated traffic.
The reconciler now plans a stop+remove for every observed non-relay
container of a provider service, and the RunProvider node depends on
those removals: the canonical name is free by the time
ensureServiceRelay creates the relay. The relay itself (RelayLabel) is
the provider service's legitimate container and is left alone —
converged by ensureServiceRelay, not by the plan.
The e2e scenario migrates a deployed service to a provider and locks
the replacement (Recreated, relay reachable at the compose-native
address); the Scenario DSL gains FromFile — a local mirror of
FromRemote — to switch the model between steps.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
The exact pull-failure wording is daemon-backend dependent (classic
graphdriver: "pull access denied for ..."; containerd image store:
"...: not found"), and OutputMatches only checks stdout while the
daemon's progress line is written to stderr. Assert the image name
appears on stderr instead, which holds regardless of backend or
wording.
Signed-off-by: Ricardo Branco <rbranco@suse.de>
wantAbs was just wantSource under a different name, left over from an
earlier revision. Use wantSource directly.
(glours review on #14234)
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
BindMountSource kept iterating after locating the bind mount at the
expected destination, so a hypothetical second bind entry at the same
target would trip a spurious mismatch even though the first entry
already confirmed the source. Break out of the loop once a match is
found, per docker-agent review feedback on #14234.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
.Mounts also lists named volumes and tmpfs entries at the same
Destination; matching on Destination alone let those shadow the
intended bind mount, either failing with a confusing volume Source or
silently passing against an empty tmpfs Source. Filter to Type ==
"bind" before comparing, as the function's name and doc promise.
Reported by docker-agent.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
filepath.Abs resolves a relative wantSource against the test process
cwd, not any project directory -- silently comparing against the
wrong base for a future caller passing a relative path, even though
the doc comment frames this as a general check. Reject a relative
wantSource explicitly instead.
(docker-agent review on #14234)
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
TestOciRemoteProjectDirectory publishes a project whose only service
mounts a relative volume, then runs `up` on the oci:// artifact with an
explicit --project-directory pointing elsewhere. The relative volume
must resolve against that directory.
It currently fails against the pinned compose-go: LoadConfigFiles
defaults the working dir to the downloaded artifact's own cache
directory whenever a remote resource loader is involved, silently
overriding the explicit --project-directory the same way it would a
mere default -- docker/compose#14224. On Docker Desktop this surfaces
as a hard failure (the cache directory isn't a shared mount); on Linux
it silently mounts the wrong directory, matching the original report.
New BindMountSource check (pkg/e2e/checks.go) pins a service's bind
mount source to an exact expected path, for tests that need to verify
which working directory a relative volume path resolved against.
Needs the compose-go fix (github.com/ndeloof/compose-go@a626c70,
branch 14224-working-dir) to pass -- not yet reflected in go.mod here.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
TestWatch/debian flakes on loaded runners during 'writing to a file
until Compose watch is up and running': that bootstrap loop ran under
poll.WaitOn's default 10s budget, which must absorb image pull/build,
container start and watcher initialization. Only the bootstrap gets the
2-minute budget — every later step keeps the sharp default so a real
sync regression still fails fast.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
The FinishedAt anchor did not cure the third-run loss on CI (still 2
worlds for 3 exit notices after a full minute, oldstable runner). The
remaining suspects are on both sides of the API: a line the daemon
never captured (copier torn down before a millisecond-lived run's
output) or a line compose still fails to relay. On timeout the test
now dumps `docker logs` for the container — ground truth that
discriminates the two on the next CI occurrence.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Three tests failed 9 CI runs across 5 branches this week, all on
asynchronous-observation races, none reproducible locally:
- RequireServiceState asserted on a single `compose ps` snapshot; the
daemon reports state transitions asynchronously from everything else
a test observes (TestUpDependenciesNotStopped saw 'created' while
the container's logs were already flowing). It now polls until the
state converges (15s bound).
- TestAttachRestart counted restart log lines in a snapshot taken as
soon as the third exit notice appeared; exit notices come from the
events monitor while log lines come from the re-attached logs
stream — two channels with no ordering between them. The count is
now awaited like the exit notices already were; a genuinely lost
line still fails, by timeout.
- TestUpExitCodeFromContainerKilled ran a full up+abort cycle under a
60s ceiling, once exceeded on a loaded oldstable runner; raised to
120s.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
docker-agent review: without --build, an image tagged
e2e-additional-context-base:latest left over from a previous run would
let up skip the build entirely, passing the test without exercising
the additional_contexts-to-a-disabled-service path it exists to lock
in.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
A service reachable only as another service's build additional_contexts
must still build even when its own profile is inactive: it's referenced
for its image, not started as a workload -- the same tolerance the
depends_on consistency check already grants a disabled, non-required
dependency, and the same case addBuildDependencies already special-cases
on the docker/compose side.
compose-go's own consistency check doesn't grant that tolerance yet: it
rejects the reference outright, failing the whole project load before
addBuildDependencies (or anything else, up included) ever runs -- for
up, build and up --no-build alike, exactly as reported.
This is expected to fail until compose-go bumps to include
compose-spec/compose-go#931.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
The previous fix only covered create/start. projectOrName backs every
other service-targeting command too (stop, kill, pause, unpause, logs,
rm, down, ps, events), so they still surfaced the same two problems: a
raw "no such service" error for a job name, and -- when
COMPOSE_PROJECT_NAME is set -- a silent no-op, since projectOrName's
label-driven fallback swallows the load error entirely.
Fold the check into projectOrName so every caller is fixed at once,
instead of duplicating the wiring per command. start.go's own
job-handling code, now redundant, is removed; jobTargetErr and
unselectedJobs (cmd/compose/run.go) are unchanged, just called from one
more place.
Adds unit coverage for projectOrName itself (including the
COMPOSE_PROJECT_NAME path and the typo-correlation edge case) and e2e
coverage for two more callers (stop, down) to confirm the fix lives in
the shared helper rather than being re-implemented per command.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
projectOrName falls back to a label-driven, file-less project on any
load failure when COMPOSE_PROJECT_NAME is set -- swallowing the load
error entirely, including "no such service" for a target that's
actually a declared job. Since that branch returns err == nil,
jobTargetErr (gated on err != nil) and rejectScheduledJobs (gated on
project != nil) were both skipped: `docker compose start migrate`
fell through to a label-driven start that finds no container for a
job that was never run, and exited 0 having silently done nothing.
Refuse a named job explicitly on that fallback path too, reusing
unselectedJobs from the previous commit.
Also adds the test coverage this and the previous fix (job-target
error messages on create/start) were entirely missing: create.go and
start.go had no unit tests at all, and pkg/e2e/jobs_test.go only
exercised up/run.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
materializeJobClosure walked job-typed depends_on edges without
re-checking triggers.manual: false on anything but the top-level run
target, so `docker compose run A` where A depends_on job B (manual:
false) silently ran B anyway.
manual: false declares a job harmful to trigger outside its
schedule; depends_on doesn't change who caused the execution or when
-- pulling B in to satisfy A's dependency is still the run command
causing that out-of-schedule execution, one hop removed. Refuse it
the same way the top-level check already does, before anything in the
closure is created.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Every publish safeguard and image-pinning path used to walk only
project.Services, leaving jobs invisible:
- the sensitive-data checks (literal environment values, env_file
scans, bind-mount warnings, build-only rejection) now cover jobs — a
job declaring AWS_SECRET_ACCESS_KEY=... was published without the
guard rail a service gets;
- the image-digest override pins job images too (jobs dressed as
services run through the exact WithImagesResolved semantics), so the
published artifact is reproducible for jobs as well;
- the application index references job images;
- `config --images` lists them.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
compose-go resolves each hook against its service at load time: the
model itself carries the full container specification a hook runs with,
and the runtime consumes it as-is through the standard create path —
the runtime-side merge helper goes away.
Consuming the full spec means honoring ALL of it:
- service references it may carry — volumes_from entries, and
service:-scoped network_mode/ipc/pid, inherited or declared — resolve
to live container IDs exactly like the service create path does; the
daemon knows nothing about service names and rejected them, failing
up for any service combining volumes_from with a pre_start hook
(locked by an e2e scenario).
- hook labels — declared or inherited — merge into the container's
labels, the runtime identification set winning on conflicts.
- the <API 1.44 network-connect fallback joins the HOOK's networks,
not the parent service's: a hook overriding networks was connected
to the wrong ones.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Per the spec, any job can be triggered manually by an explicit run
command, its automated triggers notwithstanding — so run now accepts
scheduled jobs too. The exception is a job explicitly declared with
triggers.manual: false, which run rejects: meant for scheduled jobs
whose out-of-schedule execution would be harmful.
compose-go is bumped to the jobs-branch commit making Manual tri-state
(*bool) and allowing manual and schedule to be combined.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Scenario-DSL coverage for the jobs entry points:
- up refuses a project declaring an active scheduled job before creating
any resource;
- run executes a manual job like a service, starting its depends_on
services first, and refuses a schedule-only job;
- a job's own env_file feeds its environment through run — the
materialization happens before environment resolution;
- a job depending on another job runs the dependency to completion
first, through the exact machinery a service dependency uses.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>