kitty/docs/performance.rst
2026-11-19 19:57:37 +05:30

261 lines
12 KiB
ReStructuredText

Performance
===================
The main goals for |kitty| performance are user perceived latency while typing
and "smoothness" while scrolling as well as CPU usage. |kitty| tries hard to
find an optimum balance for these. To that end it keeps a cache of each
rendered glyph in video RAM so that font rendering is not a bottleneck.
Interaction with child programs takes place in a separate thread from
rendering, to improve smoothness. Parsing of the byte stream is done using
`vector CPU instructions
<https://en.wikipedia.org/wiki/Single_instruction,_multiple_data>`__ for
maximum performance. Updates to the screen typically require sending just a few
bytes to the GPU.
Output from programs is parsed as soon as it is received. kitty redraws the
screen only when something changes and the pacing of redraws is controlled by
the :opt:`render_interval` option. By default, redraws are synced to the
refresh rate of the monitor, using the render frames provided by the windowing
system: the Wayland frame callbacks, the macOS display link, or on X11, the
vertical blank notifications of the Present extension. This means kitty never
draws frames that cannot be displayed, does not cause `screen tearing
<https://en.wikipedia.org/wiki/Screen_tearing>`__, and stops drawing when its
window is hidden. The first redraw after the screen has been idle happens
immediately, so syncing to the monitor does not add latency to typing.
You can also ask kitty to redraw on a schedule instead, using a fixed minimum
interval between frames, or cap the frame rate while still syncing to the
monitor, for example, to save energy on high refresh rate monitors. See
:ref:`conf-kitty-performance` for details.
Benchmarks
-------------
Measuring terminal emulator performance is fairly subtle, there are three main
axes on which performance is measured: Energy usage for typical tasks,
Keyboard to screen latency, and throughput (processing large amounts of data).
Keyboard to screen latency
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This is measured either with dedicated hardware, or software such as `Typometer
<https://pavelfatin.com/typometer/>`__. Third party measurements comparing
kitty with other terminal emulators on various systems show kitty has best in
class keyboard to screen latency.
Note that to minimize latency at the expense of more energy usage, use the
following settings in kitty.conf::
render_interval 2
wayland_enable_ime no
This makes kitty redraw as soon as possible after something changes, rather
than waiting for the next refresh of the monitor, while drawing at most 500
frames a second. On X11 without a compositor, this can cause screen tearing.
On Wayland, the compositor will still only show one frame per refresh of the
monitor, so the gains are small.
To reduce energy usage instead, you can limit the frame rate, while still
syncing to the monitor, for example, to about 30 frames a second, with::
render_interval monitor 33
`Hardware based measurement on macOS
<https://thume.ca/2020/05/20/making-a-latency-tester/>`__ show that kitty and
Apple's Terminal.app share the crown for best latency. These
measurements were done with the now removed ``input_delay`` option at its
default value of ``3 ms`` which means kitty's actual numbers would be even lower.
`Typometer based measurements on Linux
<https://github.com/kovidgoyal/kitty/issues/2701#issuecomment-911089374>`__
show that kitty has far and away the best latency of the terminals tested.
.. _throughput:
Throughput
^^^^^^^^^^^^^^^^
kitty has a builtin kitten to measure throughput, it works by dumping large
amounts of data of different types into the tty device and measuring how fast
the terminal parses and responds to it. To run the tests yourself, run
``kitten __benchmark__`` in the terminal emulator you want to test, where the
kitten binary is part of the kitty install. To compare multiple terminals, use
the :repo_file:`comparative_benchmark.py` script in the kitty source code, which
runs the benchmark in all installed terminals from the set below, on a
Linux+Wayland system.
The measurements below were taken with the same font (DejaVu Sans Mono 11pt),
window size (120x40 cells) and otherwise default settings for all terminals,
on the same computer, running Linux 7.2 under Wayland with an ``AMD
Ryzen AI 7 PRO 360``, with the terminals pinned to its fast cores. The numbers
are megabytes per second of data that the terminal processes, higher is better.
Entries are in order of decreasing average performance.
=========================== ===== ======= ===== ====== ====== =======
Terminal ASCII Unicode CSI Colors Images Average
=========================== ===== ======= ===== ====== ====== =======
ghostty 1.4.0 525.8 148.9 156.9 198.0 836.3 373.2
kitty 1.0.0 385.7 140.8 116.5 188.4 805.3 327.3
foot 1.28.0 316.6 103.1 63.5 331.8 491.3 261.3
alacritty 0.17.0 162.4 117.7 78.6 240.1 419.5 203.7
ptyxis 50.1 272.4 95.0 39.1 148.6 263.0 163.6
wezterm 20260716 31.7 38.7 15.4 45.7 274.8 81.2
konsole 26.08.3 46.8 62.7 46.1 113.1 31.8 60.1
xterm 411 61.8 48.2 < 2.8 53.5 117.3 < 56.7
alacritty 0.17.0 + tmux 3.8 57.2 9.5 24.9 35.6 53.8 36.2
=========================== ===== ======= ===== ====== ====== =======
In this table, each column represents different types of data. The CSI column
is for data consisting of a mix of typical formatting escape codes and some
ASCII only text. The Colors column is for text where every character has
a different 24-bit color. Full results, including all the benchmarks, for the
four fastest terminals are below.
.. tab-set::
.. tab-item:: kitty
================= ===== ======= ======== =========
Benchmark MB/s Cells/s Time (s) Data (MB)
================= ===== ======= ======== =========
ascii 385.7 387.3 M 1.04 399
unicode 140.8 81.6 M 4.91 692
scrollback 270.0 271.1 M 1.48 399
render 370.0 371.5 M 1.08 399
unique_unicode 51.3 - 17.07 875
csi 116.5 - 4.29 500
long_escape_codes 812.4 - 4.83 3920
truecolor_text 188.4 - 5.31 1000
palette16_text 223.3 - 4.48 1000
halfblocks 261.5 - 3.83 1001
images 805.3 - 3.31 2667
================= ===== ======= ======== =========
.. tab-item:: ghostty
================= ===== ======= ======== =========
Benchmark MB/s Cells/s Time (s) Data (MB)
================= ===== ======= ======== =========
ascii 525.8 527.9 M 0.76 399
unicode 148.9 86.2 M 4.65 693
scrollback 384.0 385.5 M 1.04 399
render 406.6 408.2 M 0.98 399
unique_unicode 65.3 - 13.39 875
csi 156.9 - 3.19 500
long_escape_codes 829.0 - 4.73 3920
truecolor_text 198.0 - 5.05 1000
palette16_text 256.2 - 3.90 1000
halfblocks 199.7 - 5.01 1001
images 836.3 - 3.19 2667
================= ===== ======= ======== =========
.. tab-item:: foot
================= ===== ======= ======== =========
Benchmark MB/s Cells/s Time (s) Data (MB)
================= ===== ======= ======== =========
ascii 316.6 317.9 M 1.26 399
unicode 103.1 59.7 M 6.71 692
scrollback 295.6 296.8 M 1.35 399
render 294.1 295.3 M 1.36 399
unique_unicode 11.3 - 77.68 875
csi 63.5 - 7.87 500
long_escape_codes 283.8 - 13.81 3920
truecolor_text 331.8 - 3.01 1000
palette16_text 329.4 - 3.04 1000
halfblocks 306.1 - 3.27 1001
images 491.3 - 5.43 2667
================= ===== ======= ======== =========
.. tab-item:: alacritty
================= ===== ======= ======== =========
Benchmark MB/s Cells/s Time (s) Data (MB)
================= ===== ======= ======== =========
ascii 162.4 163.1 M 2.46 399
unicode 117.7 68.2 M 5.88 692
scrollback 82.0 82.4 M 4.87 399
render 158.5 159.1 M 2.52 399
unique_unicode 59.8 - 14.64 875
csi 78.6 - 6.36 500
long_escape_codes 146.2 - 26.82 3920
truecolor_text 240.1 - 4.16 1000
palette16_text 236.5 - 4.23 1000
halfblocks 259.2 - 3.86 1001
images 419.5 - 6.36 2667
================= ===== ======= ======== =========
.. note::
The benchmark kitten suppresses actual rendering, to better focus on parser
speed, except in its ``render`` benchmark. However, modern terminals
typically render asynchronously, therefore the numbers from that benchmark
are not really useful for comparison, as it is just a game about how much
input to *batch* before rendering the next frame.
.. note::
iTerm2 and Terminal.app are left out as they do not run under Linux. ptyxis
uses the same VTE terminal widget as GNOME Terminal. Alacritty+tmux is
included to show the effect of putting a terminal multiplexer into the mix
and because alacritty isn't remotely comparable to any of the other
terminals feature wise without tmux.
.. note::
Each benchmark was given a maximum of 180 seconds per terminal. xterm did
not complete the CSI benchmark in that time, so its number for that
benchmark is an upper bound. The Images column is only meaningful for
terminals that support the :doc:`kitty graphics protocol
<graphics-protocol>`, other terminals simply discard the image data.
.. note::
Terminals that do not support the `Synchronized update
<https://gitlab.com/gnachman/iterm2/-/wikis/synchronized-updates-spec>`__
escape code used to suppress rendering, render while the benchmark is running,
which lowers their numbers.
Energy usage
^^^^^^^^^^^^^^^^^
Sadly, I do not have the infrastructure to measure actual energy usage so CPU
usage will have to stand in for it. Here are some CPU usage numbers for the
task of scrolling a file continuously in :program:`less`. The CPU usage is for
the terminal process and X together and is measured using :program:`htop`. The
measurements are taken at the same font and window size for all terminals on a
``Intel(R) Core(TM) i7-4820K CPU @ 3.70GHz`` CPU with a ``Advanced Micro
Devices, Inc. [AMD/ATI] Cape Verde XT [Radeon HD 7770/8760 / R7 250X]`` GPU.
============== =========================
Terminal CPU usage (X + terminal)
============== =========================
|kitty| 6 - 8%
xterm 5 - 7% (but scrolling was extremely janky)
termite 10 - 13%
urxvt 12 - 14%
gnome-terminal 15 - 17%
konsole 29 - 31%
============== =========================
As you can see, |kitty| uses much less CPU than all terminals, except xterm, but
its scrolling "smoothness" is much better than that of xterm (at least to my,
admittedly biased, eyes).
Instrumenting kitty
-----------------------
To profile kitty performance on Linux, first install ``perf`` and run::
sudo setcap cap_sys_admin,cap_sys_ptrace,cap_syslog=ep /usr/bin/perf
Then build kitty with::
make profile
Finally get benchmark and profiling results using::
./benchmark.py --perf