mirror of
https://github.com/buybitart/get-the-hacker.git
synced 2026-11-20 14:40:55 +00:00
95 lines
3.9 KiB
JSON
95 lines
3.9 KiB
JSON
{
|
|
"schema_version": 1,
|
|
"methods": [
|
|
{
|
|
"rule_id": "deauth_burst",
|
|
"name": "Deauth and Disassociation",
|
|
"description": "Deauth ends authentication. Disassociation ends an AP link. Both also occur in normal use.",
|
|
"advice": "Check AP restart logs. Check PMF support on the AP and clients. PMF protects selected management frames. It does not stop all radio loss.",
|
|
"limit": "One disconnect is not an attack. AP work can also cause a burst.",
|
|
"sources": [
|
|
"docs/DETECTION.md"
|
|
]
|
|
},
|
|
{
|
|
"rule_id": "active_recon",
|
|
"name": "Directed Probe activity",
|
|
"description": "Probe Requests ask for Wi-Fi networks. Normal phones also send them.",
|
|
"advice": "Check the listed Probe Requests. Do not block a device from this observation alone.",
|
|
"limit": "A passive receiver sends no frames. MAC rotation does not prove one device.",
|
|
"sources": [
|
|
"docs/DETECTION.md"
|
|
]
|
|
},
|
|
{
|
|
"rule_id": "possible_evil_twin",
|
|
"name": "Evil Twin indicators",
|
|
"description": "An AP can copy a network name. A name match alone is not proof.",
|
|
"advice": "Check the BSSID and security on your router. Remove wrong saved network profiles after this check.",
|
|
"limit": "A guest AP can use the same name. A clone with the same security can pass this check.",
|
|
"sources": [
|
|
"docs/DETECTION.md"
|
|
]
|
|
},
|
|
{
|
|
"rule_id": "ap_policy_change",
|
|
"name": "AP security policy change",
|
|
"description": "An AP security setting can change. GTH can compare saved policy with observed fields.",
|
|
"advice": "Check the router security policy. Confirm the BSSID and the intended PMF and AKM settings.",
|
|
"limit": "A real admin change can match this rule. A BSSID is not an AP identity proof.",
|
|
"sources": [
|
|
"docs/DETECTION.md"
|
|
]
|
|
},
|
|
{
|
|
"rule_id": "possible_karma",
|
|
"name": "Multi-SSID response indicators",
|
|
"description": "Some AP tools answer requests for many network names.",
|
|
"advice": "Check the responding BSSID. Review saved Wi-Fi profiles and auto-connect settings.",
|
|
"limit": "The source uses an active challenge. Passive GTH does not send that challenge.",
|
|
"sources": [
|
|
"docs/DETECTION.md"
|
|
]
|
|
},
|
|
{
|
|
"rule_id": "handshake_attempt_burst",
|
|
"name": "EAPOL retry indicators",
|
|
"description": "Repeated WPA attempts can use different M2 nonces.",
|
|
"advice": "Check AP authentication logs. Check the client password. Use a strong Wi-Fi password.",
|
|
"limit": "A bad saved password or missing capture frames can match. Offline password tests are not visible.",
|
|
"sources": [
|
|
"docs/DETECTION.md"
|
|
]
|
|
},
|
|
{
|
|
"rule_id": "auth_failure_burst",
|
|
"name": "Authentication failure indicators",
|
|
"description": "An AP can return a failure status during authentication.",
|
|
"advice": "Check AP logs and client settings before changing access rules.",
|
|
"limit": "Failure frames do not show intent or a password.",
|
|
"sources": [
|
|
"docs/DETECTION.md"
|
|
]
|
|
},
|
|
{
|
|
"rule_id": "assoc_failure_burst",
|
|
"name": "Association rejection indicators",
|
|
"description": "An AP can reject an Association or Reassociation request.",
|
|
"advice": "Check AP client limits and access settings. Compare the reject status with AP logs.",
|
|
"limit": "AP limits and client settings can cause rejects.",
|
|
"sources": [
|
|
"docs/DETECTION.md"
|
|
]
|
|
},
|
|
{
|
|
"rule_id": "wps_failure_burst",
|
|
"name": "WPS failure indicators",
|
|
"description": "WPS messages contain message types, nonces, and Config Error values.",
|
|
"advice": "Turn off WPS if it is not needed. Check AP WPS logs.",
|
|
"limit": "Normal setup retries can fail. A WPS message does not expose a PIN guess.",
|
|
"sources": [
|
|
"docs/DETECTION.md"
|
|
]
|
|
}
|
|
]
|
|
}
|