* fastcgi: derive SCRIPT_FILENAME from the normalized request path
Path matchers evaluate a normalized request path — MatchPath applies
normalizeWindowsPath and then CleanPath before comparing — but the FastCGI
transport split r.URL.Path verbatim. Caddy does not rewrite r.URL.Path itself,
so the two disagreed whenever the path contained dot segments after the split
token: /admin.php/../../other.php was matched as /other.php while
SCRIPT_FILENAME resolved to <root>/admin.php, and on Windows the same held for
/admin.php\..\other.php. A route gated by a path matcher could therefore execute
a script that matcher never evaluated.
php_fastcgi generates a rewrite route that normally normalizes the path first,
but that route can fail to match, so the transport establishes the invariant
itself rather than inheriting it. The reason it can fail to match is addressed
in the following commit; this change does not depend on it.
caddyhttp.NormalizedPath is added so a consumer acting on a path a matcher has
already judged derives it exactly as the matcher did, rather than reassembling
the two steps and risking drift.
Scope — two divergences of the same class are NOT addressed here:
* SCRIPT_NAME remains a prefix of the request path, so a matcher naming a
script exactly (path /admin.php) is still reachable via PATH_INFO at
/admin.php/anything. Matchers protecting a script need a trailing wildcard
regardless; that is inherent to CGI, not to this bug.
* On Windows, NTFS 8.3 short names are not rejected here. fileserver's
ServeHTTP rejects them (and ':' for ADS) precisely because matchers cannot
see through them, so GET /ADMIN~1.PHP is judged as /admin~1.php by a
path matcher while NTFS resolves SCRIPT_FILENAME to admin.php. Closing that
means sharing fileserver's hasWindowsShortName across packages, which is a
larger change than this fix; it is reported alongside this one and a patch
is available on request.
Side effects: PATH_INFO and DOCUMENT_URI are now derived from the normalized
path, so repeated slashes are merged and "." segments removed (/index.php//a//b
yields PATH_INFO=/a/b rather than //a//b), and on Windows per-component trailing
dots and spaces are folded. An application routing on a raw PATH_INFO will see
this. An empty URL.Path stays empty rather than becoming ".". REQUEST_URI is
unchanged and still carries the original target.
Tests: a buildEnv regression over literal and percent-encoded dot segments,
covering that legitimate PATH_INFO is preserved and an empty path stays empty; a
Windows-only counterpart whose cases each fail without the Windows
normalization; and an end-to-end test of a basic_auth-protected php_fastcgi
route against a FastCGI responder reporting the SCRIPT_FILENAME it received. The
end-to-end test uses `index off` so no rewrite route exists, ensuring it
exercises the transport rather than the rewrite.
* fileserver: make first_exist_fallback fall back when the file is absent
The try_policy first_exist_fallback is documented to match unconditionally,
falling back to the last try_files entry when no earlier candidate exists. It
did not: candidates are built with fs.Glob, which returns only paths that exist,
so an absent final entry left the list empty and the fallback branch — nested
inside the loop over that list — was unreachable.
php_fastcgi hard-codes this policy so its generated rewrite route always runs;
when the fallback failed, that rewrite was silently skipped.
Keep the pattern itself as a candidate when nothing globbed. This also aligns
Linux with Windows, where globResults is populated without an existence check
and the fallback already fired.
Behaviour change worth calling out: on a php_fastcgi site whose root has no
index.php (or no file matching the configured index), the rewrite now always
runs, so a request for a path that exists neither on the filesystem nor as a PHP
script is proxied to the backend as <root>/index.php instead of falling through
to file_server and returning 404. That is what the documented fallback promises,
but for a site of standalone .php scripts plus static assets it is a visible
change: unmatched requests now reach PHP-FPM.
The other try policies still test existence explicitly, so a candidate that does
not exist is skipped — but note this applies to ANY pattern that expands to
nothing, not only a malformed glob: a file whose literal name contains glob
metacharacters can now match under first_exist, largest_size and smallest_size
where previously globbing found it only via expansion.
* fileserver: synthesize the literal candidate only for the fallback entry
Address review: the previous commit appended the pattern itself as a
candidate inside makeCandidates whenever globbing found nothing. Since
makeCandidates is shared by every try_policy, first_exist, largest_size,
smallest_size and most_recently_modified could then stat the literal
pattern, so a file whose name contains glob metacharacters (for example
"lit[1].txt") matched where it did not before.
Restore makeCandidates to its original behaviour and build the literal
candidate only for the final entry of first_exist_fallback, the one
entry that is documented to match unconditionally. Placeholders in that
entry are expanded without glob escaping, since nothing is globbed, so
a request for /a[b].txt falls back to /a[b].txt rather than /a\[b].txt.
The path is still cleaned and joined with SanitizedPathJoin, so it
cannot escape the root.
This supersedes the last paragraph of the previous commit message: the
other policies now behave exactly as they did before that commit. The
php_fastcgi behaviour change described there still applies.
Add a regression test that creates a file literally named "lit[1].txt"
and checks that only the fallback entry of first_exist_fallback matches
it by its literal name, including the split_path remainder.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* fastcgi: add license headers to new test files
Address review: phpfastcgi_test.go and fastcgi_windows_test.go were
added without the Apache license header used across the codebase. On
the Windows test, the header goes above the build constraint, matching
replacer_fuzz.go.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* fastcgi: avoid hardcoded Unix paths in dot-segment tests
Address review: the new tests compared SCRIPT_FILENAME against strings
with forward slashes ("/srv/other.php", a "/admin.php" suffix), but the
transport makes the root absolute and joins it with filepath.Join, so
on Windows the value is C:\srv\other.php and the assertions would fail.
Use a temporary directory as the root and build the expected paths with
filepath instead.
Also lower the bcrypt cost of the integration test's basic_auth hash to
the minimum. At cost 14 the authenticated request exceeded the 5s test
client timeout under -race.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
(cherry picked from commit 4ec5a5c39a)
A CGI script that redirects by printing only a Location header got a
200 response with that header, which clients do not follow. RFC 3875
section 6.2.3 says the server sends 302 Found for this response, and
net/http/cgi, nginx and Apache do so.
(cherry picked from commit 1962b20401)
With request_buffers or response_buffers set to unlimited, the error
from reading the body was discarded and whatever had been read was
treated as the complete body. A request cut short by request_body
max_size was forwarded truncated with a 200, and a truncated chunked
upstream response was sent to the client as complete.
Handle a read error the same way the limited case already does.
(cherry picked from commit fc3d83400b)
* templates: avoid zero content length for bodyless responses
Drop Content-Length for HEAD and statuses that cannot carry a body instead of using the empty template buffer length. Continue setting the rendered length for ordinary responses.
AI-assisted-by: Jcode (OpenAI)
* templates: test Content-Length for HEAD, 204 and 304 responses
* templates: omit Content-Length for 2xx responses to CONNECT
RFC 9110 section 8.6 forbids Content-Length in any 2xx response to
CONNECT. Non-2xx CONNECT responses still report the rendered length.
(cherry picked from commit 401582cccf)
* caddyhttp: Combine repeated expression matchers in a matcher set
The Caddyfile parser groups repeated matchers of the same type and hands
all their segments to the module, but the expression matcher only read
the first segment, so every later `expression` line in a named matcher
or `not` block was dropped without an error. Read every segment and AND
the expressions, like the other matchers in a set.
* caddyhttp: Put each joined expression on its own line
A trailing // comment in one expression no longer swallows the closing
parenthesis and the expressions joined after it.
* caddyhttp: Reject repeated expression matchers instead of joining them
A second expression line in a named matcher or a not block is now a
Caddyfile error that points to combining them with && in one expression,
instead of being dropped or joined with an implied operator.
(cherry picked from commit d4165a4eb1)
* caddyhttp: Skip matchers of grouped routes once the group is satisfied
* caddyhttp: Test that a skipped grouped route keeps regexp captures
A later rewrite in the same group must not run its path_regexp matcher
and overwrite {re.x.1} from the rewrite that was used.
(cherry picked from commit 5538b947d2)
* caddyhttp: preserve expired request-body read deadlines
* caddyhttp: retain only expired drain deadlines
Track the last successfully installed read deadline and retain it after a terminal timeout only when draining is enabled and the deadline has expired. Failed deadline changes preserve the previous installed value.
Cover early and wrapped timeouts, non-draining requests, failed deadline installation and replacement, and cleanup retries.
* caddyhttp: shorten installed deadline field name
(cherry picked from commit c31d9a71ed)
* reverseproxy: Only retry responses for expressions that use response data
Since #7569 every lb_retry_match set with an expression is evaluated against
upstream responses. An expression that only tests the request, such as
{http.request.method} == "POST", then matched every successful response:
the request was sent again to the next upstreams and the client got a 502
once retries ran out. Only treat expressions referencing {rp.*} placeholders
as response conditions.
* reverseproxy: Only count placeholders set from the response as response data
* reverseproxy: Read response placeholders from the checked expression
The expression matcher records the placeholder names its checked CEL
expression reads, so retry_match finds direct ph() calls and ignores
escaped placeholder text in string literals. A placeholder name only
known at evaluation time counts as response data.
* reverseproxy: Match response placeholder names exactly
Only the header placeholders are matched by prefix now, and both
upstream latency placeholders are listed. MatchExpression.Placeholders
returns a copy, so callers cannot change the provisioned matcher.
(cherry picked from commit 7c7456353e)
* caddyhttp: ignore case when matching hosts in logger_names
* caddyhttp: test case-insensitive logger_names through App.Provision
* caddyhttp: test case-insensitive logger_names in integration harness
(cherry picked from commit 7910dd94ee)
* encode: Don't write an empty encoded stream for HEAD responses
When nothing was written (e.g. a HEAD request), Close() still closed the
encoder, which wrote the empty stream trailer to the client. The server
then set Content-Length to that size (20 for gzip, 13 for zstd) instead
of omitting it as for the matching GET response.
* encode: Check resp.ContentLength in the HEAD test
* encode: Track body writes to decide whether to close the encoder
(cherry picked from commit 093fd4b7ec)
* reverseproxy: Keep own headers after 1xx responses
Since #6656 the 1xx handler clears the whole header map after writing the
informational response, which also drops headers set before proxying (for
example by the header handler). Restore those after clearing, as #5091 did.
* reverseproxy: Use maps.Copy to restore own headers
* reverseproxy: Check the 103 reaches the client in the 1xx headers test
(cherry picked from commit 519be12306)
Wrap backend dial failures as reverseproxy.DialError so non-GET requests can be retried when no connection was made.
AI-assisted implementation and test; reviewed by zemamba.
Signed-off-by: zemamba <zemamba@gmail.com>
(cherry picked from commit 221ebc4503)
* templates: Delete file headers on any template error
A template that fails to parse or execute (not only {{httpError}}) left
the Content-Length, Etag and related headers set by file_server on the
error response, so clients received a 500 that declared the file's size
but had no body.
* templates: Also delete Content-Encoding and Content-Range on errors
Precompressed and ranged file responses could leave these headers on the
replacement error response.
(cherry picked from commit 6727b2f3a9)
A handler setting a write deadline through http.ResponseController
reached the connection directly, and the next Write or Flush through
IdleTimeoutWriter replaced it with now+write_idle_timeout. Handlers
bounding a single write, like Mercure's dispatch_timeout, which drops
SSE subscribers that can't receive an update within 5s, were silently
extended to the 1 minute default. On HTTP/2, clearing between writes
also wiped the handler deadline.
IdleTimeoutWriter now implements SetWriteDeadline, keeps the handler
deadline as a ceiling for idle resets, and restores it instead of
HardDeadline alone when clearing between writes. A handler can
tighten the idle timeout but not loosen it.
(cherry picked from commit 9c44b6685e)
directoryListing built each symlink's lookup path from the escaped
request path. In a directory whose name needs escaping, such as one with
a space, the stat failed, so directory symlinks were listed as files,
file symlinks showed the link's own size, and reveal_symlinks showed no
target.
Use the decoded path, which the function already computes for the page
title. The escaped path is still used for the page path and item URLs.
(cherry picked from commit 96eadf18f6)
read_idle_timeout and write_idle_timeout default to 1 minute when zero,
and the wrappers are only installed for positive values, so a negative
value already disables them. Document it and cover it with tests, since
it is the only way to opt out, for instance behind a reverse proxy that
already protects from slow clients.
(cherry picked from commit c65c248336)
* caddyhttp: only bound HTTP/2 body reads in flight with the idle timeout
On HTTP/2, the read deadline is a timer that fails the request body
when it fires, even with no read in flight. IdleTimeoutReader left the
idle deadline armed between reads, so a handler that stopped reading
for longer than read_body_idle (1 minute by default) lost the body,
although the client was only held back by flow control. For example,
reverse_proxy uploading to an upstream that's slow to accept the body
failed with a 502.
This is the read side of #8118. Like IdleTimeoutWriter does since
read on HTTP/2, so the idle deadline only bounds reads in flight. A
client that stops sending is still cut off, since the deadline is set
before each read. HTTP/1 and HTTP/3 only check the deadline during a
read, so they're unchanged.
Written with Claude Code (Claude Opus 5.5); the human submitter is
responsible for reviewing it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* caddyhttp: track a released hard read deadline as armed
From review: with HardDeadline set, releasing the idle deadline between
reads left an HTTP/2 timer armed (at HardDeadline) while deadlineSet
recorded that none was, so clearDeadlineLocked would skip clearing it.
Track which deadline is armed (none, idle, or only the hard one) instead
of a bool, and have each check ask the question it means: re-arming and
releasing only apply to an armed idle deadline, while clearing applies
to any.
The writer's deadlineSet already only means "idle deadline armed",
since nothing clears the hard deadline it leaves; document that.
Written with Claude Code (Claude Opus 5.5); the human submitter is
responsible for reviewing it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* caddyhttp: clear released hard deadline at handler end, skip no-op sets
From review:
- After a partial read releases the idle deadline to HardDeadline, a
handler that returns without reading again left that timer armed past
HandlerDone, which only cleared after a terminal error. HandlerDone
now also clears a released hard deadline.
- When the idle deadline is capped to HardDeadline, the reader and
writer set the same deadline again when releasing it, and the writer
once more in HandlerDone. On HTTP/2 each is a message to the serve
loop. Both now remember the deadline they armed and skip setting it
again. Within a request, only these wrappers set the client's
deadlines.
Replaces the earlier test that faked a terminal error with the partial
read followed directly by HandlerDone.
Written with Claude Code (Claude Opus 5.5); the human submitter is
responsible for reviewing it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* caddyhttp: only skip re-setting an armed hard deadline
Skipping any deadline equal to the one already armed also skipped idle
deadlines on Windows, where two calls to time.Now in the same clock tick
return the same time, so successive idle deadlines can be equal. That
broke tests counting deadline calls there. Only skip HardDeadline, the
case from review where the idle deadline is capped to it; other
deadlines are always set.
Written with Claude Code (Claude Opus 5.5); the human submitter is
responsible for reviewing it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* caddyhttp: restore deadlines without trusting cached transport state
Always set the requested read and write deadlines because another handler can change them through its own response controller. Remove the armedAt shortcut and cover intervening deadline changes for reads, writes, ReadFrom, flushes, and HandlerDone.
AI-assisted with OpenAI Codex (GPT-6); tested under human direction.
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 30d3bd2a89)
[backport: test adapted to the 2.11 finalizeResponse signature, which
lacks the upstream address argument added by #7649]
(cherry picked from commit f7eeb1d65c)
Since #7017, every *fs.PathError from stat becomes fs.ErrInvalid, and
that includes ENOTDIR. So a request like /index.php/foo got 400 instead
of 404, and pass_thru no longer fell through to the next handler.
Map ENOTDIR to fs.ErrNotExist before that check. Other path errors, such
as NUL bytes, overly long names, or transient I/O failures, keep their
current handling.
(cherry picked from commit 7ba5e147ac)
* timeouts: take precedence over server-wide and enclosing idle timeouts
The timeouts handler wrapped the request body and response writer again,
on top of the server's own idle timeout wrappers. The wrapper closest to
the connection sets the deadline last, so the server-wide read_body_idle
and write_idle (on by default since 2.11.6) silently overrode the
route's settings. The same happened between nested timeouts handlers,
where the outer, less specific one won.
The server now makes its idle timeout wrappers available through the
request context, and the timeouts handler overrides their settings while
it runs, restoring them when it returns. It only wraps when there's
nothing to override, and then registers its own wrappers so that nested
handlers override those. The server-wide read_timeout and write_timeout
still cap the whole transfer. A handler that doesn't set
max_write_chunk keeps the server-wide one.
Written with Claude Code (Claude Opus 5.5); the human submitter is
responsible for reviewing it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* timeouts: re-arm deadlines on override and suspend outer min-rate window
From review:
- On HTTP/2, a read or write deadline is a timer that fires even with
no read or write in flight. A deadline armed before a timeouts handler
started kept the outer timeout and could fail the body (or reset the
stream) inside a longer inner scope before the next read reset it.
Override and restore now move an armed deadline to the settings that
apply.
- Time spent under an override counted against the outer MinRate
window, so the restored deadline could already have expired. The
outer window is now suspended while overridden: its start moves
forward by the time spent overridden, and bytes transferred in the
meantime don't count towards it.
Adds an HTTP/2 read-before-inner-scope regression test and nested
minimum-rate coverage.
Written with Claude Code (Claude Opus 5.5); the human submitter is
responsible for reviewing it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 8f549e6df1)
CertMagic assembles an event's data before emit() can look at OnEvent,
because Go evaluates arguments first, so tls_get_certificate costs a map
and a ClientHello copy on every handshake even when nothing will read
them. caddyserver/certmagic#406 added Config.ShouldEmitFunc so an
embedder can answer that question first.
Export App.ShouldEmit and pass it along with OnEvent. The predicate has
to account for every observer, not just subscribed handlers: Emit writes
a debug line for each event, so an event is observable whenever debug
logging is on. Emit now asks the same method it exports, so the two
cannot drift.
Benchmarks are included; measurements are in the pull request.
With the Go 1.26 floor, golangci-lint's modernize analyzer (errorsastype)
flags the three errors.As calls that look for RequestBodyLimitError, which
turned the Lint workflow red on master after #8056. Replace them with the
generic errors.AsType; behavior is unchanged.
Assistance disclosure: this change was made by an AI agent (Claude Sonnet
5.5, model ID claude-sonnet-5-5) acting as Matthew Holt's agent and under
his approval. Build, go vet and the caddyhttp and caddyhttp/templates tests
pass locally; golangci-lint itself was not run locally.
Co-authored-by: Claude Code <noreply@anthropic.com>
Track pending HTTP server shutdowns across configuration reloads so
termination waits for responses still served by an older configuration.
Bound that wait by the terminating app's grace period and retain each
reload's grace context until its servers finish shutting down.
Cover HTTP/1.1, HTTP/2, and finite termination grace periods with
regression tests.
Provision previously only checked for a single opening brace at the
start of a destination, so values like {result}suffix, {result, and
{result}} passed validation. strings.Trim(dest, "{}") then silently
stored a wrong placeholder name (e.g. result}suffix), making the
intended value unavailable.
Require the destination to be exactly one placeholder: a single
opening brace at the start, a single closing brace at the end, and a
non-empty name.
Fixes#8073
The basic auth provider expanded account usernames and passwords with
repl.ReplaceAll, which blanks any {...} the replacer does not recognize
Credentials are config data, so a username like alice-{bogus} was stored
as alice- and a password like ab{cd}ef was quietly rewritten into
different valid base64, turning a config mistake into a working
password the admin never set
Use ReplaceKnown, matching the respond headers fix in #8014 and the
header handler fix in #4880, so unknown braces survive and real
placeholders like {env.*} still expand
The set body is user-supplied and commonly JSON, but it was expanded with
ReplaceAll, which blanks any {...} the replacer does not recognize, so a
plain JSON body was sent empty and a body mixing JSON with a real
placeholder was mangled
Use ReplaceKnown, matching the respond body, so unrecognized braces are
left intact and real placeholders still expand. Regression test pins both
directions
Co-authored-by: hktitof <hktitof@users.noreply.github.com>
* caddyhttp: fix randString sameCase dictionary to match its docs
The doc comment says randString excludes confusing characters like
I, l, 1, 0, O. When sameCase is true, uppercase letters and the
characters l and o should be excluded. But the sameCase dictionary
still contained '0'. Drop it.
Signed-off-by: Mohammed Al Sahaf <msaa1990@gmail.com>
* Update modules/caddyhttp/errors.go
Signed-off-by: Matt Holt <mholt@users.noreply.github.com>
* elaborate the doc, and expand tests
Signed-off-by: Mohammed Al Sahaf <msaa1990@gmail.com>
* Update modules/caddyhttp/errors_randstring_test.go
Co-authored-by: Zen Dodd <mail@steadytao.com>
Signed-off-by: Mohammed Al Sahaf <mohammed@caffeinatedwonders.com>
---------
Signed-off-by: Mohammed Al Sahaf <msaa1990@gmail.com>
Signed-off-by: Matt Holt <mholt@users.noreply.github.com>
Signed-off-by: Mohammed Al Sahaf <mohammed@caffeinatedwonders.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Zen Dodd <mail@steadytao.com>
when a request exceeds the request_body max_size limit, the request_body handler wraps the http.MaxBytesError into a caddyhttp.HandlerError carrying status 413, but the {http.request.body} and {http.request.body_base64} placeholders ran io.Copy with the error ignored, so they silently returned the truncated prefix as though it were the complete body. docs promise a 413 for reads past max_size, and silently truncating is a bad failure mode in templates and vars_regexp where the body value drives decisions. see #7691 and the narrow follow-up prescribed when #7692 was closed
reading the body now returns a dedicated RequestBodyLimitError marker instead of a generic HandlerError, and only when the read failure is actually the max_size limit. the consumers (template placeholder function, vars and vars_regexp matchers) recognize exactly that marker and wrap it in a status carrying handler error so the oversized request fails with 413, while every unrelated error value keeps its old behavior: templates still render it as text and the vars matchers still match on its error text. the surfaced error is stripped of its generated id and stack trace so a placeholder stringified into a response body cannot leak the call stack
negative regressions prove an unrelated HandlerError in templates, vars and vars_regexp does not start controlling request handling, plus integration tests for the template and vars_regexp 413 paths
ai assisted (GLM agent) under Abdel's direction and local verification
Signed-off-by: Abdel <hktitof@gmail.com>
* Move websocket header normalization later
A regression since #6621, these headers can be rewritten by cloneHeaders
and by .Add from user and transport ops. Moving this closer to where
it's round-tripped feels like the nicest solution.
I've put the harness I used to reproduce the issue at
https://codeberg.org/nfreya/caddy-websocket-headers-repro
* Integration test for normalized websocket headers
---------
Co-authored-by: Zen Dodd <mail@steadytao.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
A request whose body has no length of its own — Transfer-Encoding: chunked, or
HTTP/2 and HTTP/3 requests sent without the header — cannot be forwarded over
FastCGI until it has been buffered in full, because CGI/1.1 requires
CONTENT_LENGTH and php-fpm hangs when it is absent or wrong and the body is not
empty. When request_buffers is too small to hold the whole body, the length
stays unknown and the request is refused with 411.
The refusal said none of that. RoundTrip passes r.ContentLength to Post, which
is -1 for such a request, so the operator got a bare "411 Length Required" with
either no error at all or strconv's "invalid syntax" on a value they never
wrote. On #7386 that sent two people looking for the fault in their backend.
The 411 now carries the reason and the remedy, and the unknown-length case is
told apart from a genuinely malformed value. ParseUint becomes ParseInt plus an
explicit negative check, which is strictly tighter: values above MaxInt64 used
to be accepted and are unreachable anyway, since CONTENT_LENGTH is always
FormatInt of an int64 by the time Do sees it.
No status code changes. Every request that was refused before is still refused;
raising request_buffers is still what makes a large chunked body work.
Tests: the reachable path through Post, the unusable CONTENT_LENGTH values Do
itself guards against, an integration test driving a chunked body through a
fastcgi reverse_proxy over a unix socket at each side of the buffer boundary
(including request_buffers -1, which succeeds at any size and is the remedy),
and a boundary test recording that a body exactly the size of the buffer counts
as partial.
That last one is deliberately not changed here. Telling "exactly the limit"
apart from "more to come" costs a read that a paused stream may never answer,
and bufferedBody also backs response_buffers: measured against a body that
delivers exactly the limit and stops, the current code hands the buffered
prefix on immediately, while peeking one byte first delivers nothing at all.
Co-authored-by: Aditya <205600203+Rohilalala@users.noreply.github.com>
Co-authored-by: Zen Dodd <mail@steadytao.com>