diff --git a/Projects/Led/version-01/related_files/openscad/Driver_01.lib b/Projects/Led/version-01/related_files/openscad/Driver_01.lib
index 7257720..8dbfce9 100644
--- a/Projects/Led/version-01/related_files/openscad/Driver_01.lib
+++ b/Projects/Led/version-01/related_files/openscad/Driver_01.lib
@@ -46,9 +46,9 @@ module Pcb_Driver_01 (frozen)
     else if( drw_Driver_01_CC0805 != 0 )
       Draw_Driver_01_CC0805();
     if( is_undef(drw_board_outline) )
-      Draw_BO_Driver_01(1);
+      Draw_BO_Driver_01();
     else if( drw_board_outline != 0 )
-      Draw_BO_Driver_01(0);
+      Draw_BO_Driver_01();
   }
 }
 
@@ -58,7 +58,7 @@ module Pcb_Driver_01 (frozen)
   |   BOARD OUTLINE   |
   |___________________|
 */
-module Draw_BO_Driver_01 (bAll=0)
+module Draw_BO_Driver_01 ()
 {
     render( convexity=3 )
       translate([ 0.0, 0.0, -board_h/2.0 ])
@@ -1174,7 +1174,7 @@ module Draw_BO_Driver_01 (bAll=0)
             color([0.0,0.8,0.5])
              translate([ -7.000, -0.919, 0.0 ])
               cylinder( d=0.500, h=board_h*2.0, center=true );
-           if( bAll != 0 )
+           if( is_undef(drw_Driver_01_RTLECS) )
             translate([ -10.000, -1.140, 0.0 ])
               cube([ 0.824, 0.824, board_h*2.0 ], center=true );
            else if( drw_Driver_01_RTLECS != 0 )
@@ -1183,7 +1183,7 @@ module Draw_BO_Driver_01 (bAll=0)
            else
             translate([ -10.000, -1.140, 0.0 ])
               cylinder( d=0.824, h=board_h*2.0, center=true );
-           if( bAll != 0 )
+           if( is_undef(drw_Driver_01_RTLECS) )
             translate([ 10.000, -3.750, 0.0 ])
               cube([ 0.824, 0.824, board_h*2.0 ], center=true );
            else if( drw_Driver_01_RTLECS != 0 )
@@ -1192,7 +1192,7 @@ module Draw_BO_Driver_01 (bAll=0)
            else
             translate([ 10.000, -3.750, 0.0 ])
               cylinder( d=0.824, h=board_h*2.0, center=true );
-           if( bAll != 0 )
+           if( is_undef(drw_Driver_01_RTLECS) )
             translate([ 10.000, -0.250, 0.0 ])
               cube([ 0.824, 0.824, board_h*2.0 ], center=true );
            else if( drw_Driver_01_RTLECS != 0 )
@@ -1201,7 +1201,7 @@ module Draw_BO_Driver_01 (bAll=0)
            else
             translate([ 10.000, -0.250, 0.0 ])
               cylinder( d=0.824, h=board_h*2.0, center=true );
-           if( bAll != 0 )
+           if( is_undef(drw_Driver_01_MSOP_8T) )
             translate([ -0.584, -2.515, 0.0 ])
               cube([ 0.362, 0.362, board_h*2.0 ], center=true );
            else if( drw_Driver_01_MSOP_8T != 0 )
@@ -1210,7 +1210,7 @@ module Draw_BO_Driver_01 (bAll=0)
            else
             translate([ -0.584, -2.515, 0.0 ])
               cylinder( d=0.362, h=board_h*2.0, center=true );
-           if( bAll != 0 )
+           if( is_undef(drw_Driver_01_MSOP_8T) )
             translate([ -1.084, -1.765, 0.0 ])
               cube([ 0.362, 0.362, board_h*2.0 ], center=true );
            else if( drw_Driver_01_MSOP_8T != 0 )
@@ -1219,7 +1219,7 @@ module Draw_BO_Driver_01 (bAll=0)
            else
             translate([ -1.084, -1.765, 0.0 ])
               cylinder( d=0.362, h=board_h*2.0, center=true );
-           if( bAll != 0 )
+           if( is_undef(drw_Driver_01_MSOP_8T) )
             translate([ -0.084, -1.765, 0.0 ])
               cube([ 0.362, 0.362, board_h*2.0 ], center=true );
            else if( drw_Driver_01_MSOP_8T != 0 )
@@ -1228,7 +1228,7 @@ module Draw_BO_Driver_01 (bAll=0)
            else
             translate([ -0.084, -1.765, 0.0 ])
               cylinder( d=0.362, h=board_h*2.0, center=true );
-           if( bAll != 0 )
+           if( is_undef(drw_Driver_01_MSOP_8T) )
             translate([ -0.084, -3.265, 0.0 ])
               cube([ 0.362, 0.362, board_h*2.0 ], center=true );
            else if( drw_Driver_01_MSOP_8T != 0 )
@@ -1237,7 +1237,7 @@ module Draw_BO_Driver_01 (bAll=0)
            else
             translate([ -0.084, -3.265, 0.0 ])
               cylinder( d=0.362, h=board_h*2.0, center=true );
-           if( bAll != 0 )
+           if( is_undef(drw_Driver_01_MSOP_8T) )
             translate([ -1.084, -3.265, 0.0 ])
               cube([ 0.362, 0.362, board_h*2.0 ], center=true );
            else if( drw_Driver_01_MSOP_8T != 0 )
@@ -1246,7 +1246,7 @@ module Draw_BO_Driver_01 (bAll=0)
            else
             translate([ -1.084, -3.265, 0.0 ])
               cylinder( d=0.362, h=board_h*2.0, center=true );
-           if( bAll != 0 )
+           if( is_undef(drw_Driver_01_RTLECS) )
             translate([ -10.000, 3.250, 0.0 ])
               cube([ 0.824, 0.824, board_h*2.0 ], center=true );
            else if( drw_Driver_01_RTLECS != 0 )
diff --git a/Projects/Led/version-01/related_files/openscad/Driver_01.scad b/Projects/Led/version-01/related_files/openscad/Driver_01.scad
index f0846fc..6797d3f 100644
--- a/Projects/Led/version-01/related_files/openscad/Driver_01.scad
+++ b/Projects/Led/version-01/related_files/openscad/Driver_01.scad
@@ -23,18 +23,19 @@ MODE = 1;  // 1: full 3D view
            // 8: custom lateral projection
            // 9: custom frontal projection
            // 10: custom combo projection
-           // 11: frontal 3D section
-           // 12: lateral 3D section
-           // 13: boolean difference.
+           // 11: frontal 3D section for Custom
+           // 12: lateral 3D section for Custom
+           // 13: top 3D section for Custom
+           // 14: boolean difference.
 
-dir = 0;   // view direction for 6...12 modes
-pdist = 0; // distance between projections for mode 10
+dir = 0;   // view direction for 6...13 modes
+pdist = 20;// distance between projections for mode 10
 
 
 
 //// Drawing control
 E = true;
-drw_board_outline      = (MODE!=4&&MODE!=5&&MODE!=13)?1:0;
+drw_board_outline      = (MODE!=4&&MODE!=5&&MODE!=14)?1:0;
 drw_copper             = (MODE<4||MODE>10)?1:0;
 drw_holes              = (MODE<4||MODE>10)?1:0;
 drw_pads               = (MODE<4||MODE>10)?1:0;
@@ -81,6 +82,7 @@ module Custom ()
     translate([-6,-3.5,-9.000])
     Pcb_Package (1);
     
+    
     // end of user field
   }
 }
@@ -88,20 +90,20 @@ module Custom ()
 
 
 //// Drawing
-cube_scaleX = 2.0;// option for 4,5,11,12 modes
-cube_scaleY = 1.0;// option for 4,5,11,12 modes
-cube_scaleZ = 1.0;// option for 4,5,11,12 modes
+cube_scaleX = 2.0;// (cube sizeX for 4,5,11,12,13 modes)
+cube_scaleY = 1.0;// (cube sizeY for 4,5,11,12,13 modes)
+cube_scaleZ = 1.0;// (cube sizeZ for 4,5,11,12,13 modes)
 if (MODE == 1)
  Main();
 else if (MODE == 2)
  projection(true)
   translate([0, 0, -0.010])
-   Main(0);
+   Main();
 else if (MODE == 3)
  //mirror([1, 0, 0])
   projection(true)
    translate([0, 0, board_h + 0.010])
-    Main(0);
+    Main();
 else if (MODE == 4)
  projection()difference(){
   Main(0);
@@ -153,30 +155,42 @@ else if (MODE == 10)
     Main(0);
   }
   projection(true)
-   translate([0, frozen?10.000-pdist:(10.000-pdist-originY_Driver_01), board_h/2])
+   translate([0, frozen?10.000-pdist:(10.000+pdist-originY_Driver_01), board_h/2])
     Main();
 }
 else if (MODE == 11)
 {
+ PcbFull = 0; // make 1 for full pcb view
  difference(){
-  Custom();
+  if(PcbFull) Custom();
+  else Main();
   color("white")
   translate([0, frozen?-originY_Driver_01:0, frozen?(dir?-max_height_Driver_01/2:max_height_Driver_01/2):0])
   rotate([dir?90:-90, 0, 0])
   Draw_Driver_01_CUBE(0, frozen);}
-  Main(0);
+  if(PcbFull) Main(0);
 }
 else if (MODE == 12)
 {
+ PcbFull = 0; // make 1 for full pcb view
  difference(){
-  Custom();
+  if(PcbFull) Custom();
+  else Main();
   color("white")
   translate([frozen?-originX_Driver_01:0, 0, frozen?(dir?max_height_Driver_01/2:-max_height_Driver_01/2):0])
   rotate([0, dir?90:-90, 0])
   Draw_Driver_01_CUBE(0, frozen);}
-  Main(0);
+  if(PcbFull) Main(0);
 }
 else if (MODE == 13)
+{
+ difference(){
+  Custom();
+  translate([0,0,0])
+  Draw_Driver_01_CUBE(dir?1:0, frozen);}
+ Main(0);
+}
+else if (MODE == 14)
  difference(){
   Custom();
   Main(0);}
diff --git a/Projects/Led/version-01/related_files/openscad/Driver_01_C0402.lib b/Projects/Led/version-01/related_files/openscad/Driver_01_C0402.lib
index 06a537c..551775c 100644
--- a/Projects/Led/version-01/related_files/openscad/Driver_01_C0402.lib
+++ b/Projects/Led/version-01/related_files/openscad/Driver_01_C0402.lib
@@ -42,7 +42,7 @@ module Poly2_Driver_01_C0402 ()
     {
         minkowski()
         {
-            $fn = 20;
+            $fn = 10;
             translate([ 0.000,  0.000,  0.200 ])
             {
                 translate([ -2.300, 2.900, 0.0 ])
diff --git a/Projects/Led/version-01/related_files/openscad/Driver_01_SMTDIODE.lib b/Projects/Led/version-01/related_files/openscad/Driver_01_SMTDIODE.lib
index 4564159..7110b98 100644
--- a/Projects/Led/version-01/related_files/openscad/Driver_01_SMTDIODE.lib
+++ b/Projects/Led/version-01/related_files/openscad/Driver_01_SMTDIODE.lib
@@ -78,7 +78,7 @@ module Poly14_Driver_01_SMTDIODE ()
     {
         minkowski()
         {
-            $fn = 20;
+            $fn = 10;
             translate([ -2.443, 6.500, 0.0 ])
             {
                 rotate([ 0.000,  90.000,  0.000 ])
diff --git a/bin/ПлатФорм.exe b/bin/ПлатФорм.exe
index 784b96a..815d9c8 100644
Binary files a/bin/ПлатФорм.exe and b/bin/ПлатФорм.exe differ